How to know your ring size

If you've ever thought about buying a ring for yourself or for someone you are very very close to you, for a birthday gift or to propose to your partner, it is very important to know the size of the ring you are going to buy.

You may wonder why it is so important to know the right size. The truth is that if the size of the ring does not match the diameter of the person's finger, it will not fit will not fit properly. Thus, different situations can occur.

If, on the one hand, the ring is of a size that is too large and it is too loose, it can fall off and you risk losing it in the street or anywhere, for that matter. If, on the other hand, the ring is too small, it will fall off and you will risk losing it in the street or anywhere else, for that matter. too small you may not be able to put it on or it may be so tight that you will not be able to take it off, causing an uncomfortable situation and even pain.

So that neither of the two cases happen to you if you are going to buy one, in this article we are going to explain how you can know the size of a ring. In this way, you will not make mistakes and you will buy, even on the Internet, a ring that fits exactly the right and necessary size and necessary that you can wear or give to that special person.

Use another ring to find out the size and compare

This is one of the best methods to know the size of a ring for you or for any other person you want to give this wonderful gift. You should take the size from an old ring that is neither tight nor loose on you or the person you are going to give it to.

You can take that ring with you to compare it with the one you are thinking of buying. If the circumferences fit perfectly when you put them together, it means you have found the right size.

Measure the inside diameter of a ring

This is another method that serves to know the size of the ring and is very useful for buying this type of jewelry online. In this case, you should use a tape measure to measure the diameter of the inner face of the ring that you already have and whose measurement you know is correct.

You should always count the millimeters, since the ring measurements are usually very small. Keep in mind that 1 centimeter equals 10 millimeters. Then, you can go to a size chart and find out the size from the measurement you have obtained of the inner diameter of the ring.

If you do not have the ring at hand, you can calculate the diameter of the finger.

This method is the most suitable when you do not have another ring at hand and you want to know the measurements to buy a new one. To do this, you have to wrap a soft tape measure around the finger and adjust it as if it were a ring. Therefore, it is advisable that it is neither too loose nor too tight.

You should mark the point where the two ends of the tape meet to form the circumference and find out how long the piece of tape measures, keeping in mind that you should look at the centimeters. Then, you can find out the diameter of the finger by a simple mathematical operation in which you divide the measurement obtained, in millimeters, by the number 3.14 to obtain the diameter.

Once you have figured out the diameter of the finger, you can use any standard standard ring sizing chart to know the size number from the diameter itself. Also, in the event that the measurement does not match exactly, it is best to always round up rather than down. This is because, if you do it downwards, the ring may be too tight while, if you do it upwards, it will be slightly looser.

To make sure that the size is correct, we recommend repeating the entire ring a couple of times, we recommend repeating the whole process a couple of times to rule out any errors in the measurements or in the mathematical operation itself.

Take the ring to a jeweler

If you are not convinced with the previous methods, it is recommended that you visit a professional jeweler to make sure that the measurement and size are appropriate, and in MIMÍKOKÓ we will be happy to assist you. We have what is called a ring sizing stick which is used exclusively for this purpose in case you have a ring as a reference.

We also have finger gauges to facilitate the process. This is, without a doubt, the most reliable method of all and the one that will get you out of doubts to buy the right ring without any margin of error.

In addition, we provide you with a size guide on our own website that you can access from the same link and that will be very useful to know what is the correct size.

As you can see, there are different methods that can help you to know both the diameter of a ring from another similar ring or from the measurement and calculation of the diameter of your finger or that of another person to whom you want to give a beautiful ring. The ideal is that you wear this jewel in the most comfortable way possible, well adjusted and that there is no possibility that you drop it and lose it.

Leave a comment

All comments are moderated before being published